
全自动异型切割机
电源: 220V Maximum Cutting Size: 250毫米×250毫米×250毫米 (长×宽×高) 切削行程: 300毫米×300毫米 (X轴×Y轴)…

主驱动电动机动力: 2KW
总重量: 3500 公斤.
总体维度: 长3800mm×宽3000mm×高2800mm
切割范围: 在2000mm x 600mm x 600mm中 (长度x宽度x高度)
Y轴的位移伺服电动机功率: 1.5KW; 用于z轴: 1.5KW
切线速度: 0-40小姐, 可调节的
切线直径: 0.35-0.8毫米
冷却方法: 水循环
ESC600-4T硅杆切割机是一种专门的电线锯,旨在定量分割杆状单晶硅 (多晶硅). 采用我公司研发的圆形金刚线作为切割工具,兼容0.35mm圆形金刚线, 0.45毫米, 0.5毫米, 直径0.6mm.

ESC600-4T硅杆切割机将硅杆放在切割过程中的工作台上. 根据切割尺寸要求在标记位置进行切割. 硅棒无需移动; 工作台根据编程设定水平进给合适尺寸,实现定量分段切割. 水平运动由位移伺服电机驱动, 确保精确的尺寸, 能够切割材料薄到0.5mm. 圆形钻石电线是专门的切割工具, 产生最小的切割噪声, 低能消耗, 高切削效率, 由于小kerfs而导致的材料浪费减少, 和硅棒上的平滑表面, 实现 “用研磨切割” 影响. 这台机器是湿和干条件的双重用途切割机, 适用于各种工作条件下的切杆材料. 它可以切割最大长度和直径为2000mm x 600mm的水晶棒尺寸.

该设备的主要优点如下:
The ESC600-4T is purpose-built for the quantitative segmentation of rod-shaped monocrystalline and polycrystalline silicon. It uses a closed-loop diamond wire as the cutting tool and is also suitable for cutting other rod-type materials under various working conditions.
The cutting range is 2000 mm × 600 mm × 600 毫米 (length × width × height). Silicon rods are clamped once and do not need to be repositioned during the cut, which is what keeps the cut faces parallel.
The machine accepts closed-loop diamond wire from 0.35 毫米至 0.8 mm in diameter. Because kerf width follows wire diameter, thinner wire means less material lost per cut.
Cutting line speed is adjustable from 0 到 40 小姐. The worktable is driven by a Y-axis and Z-axis displacement servo motor (1.5 kW each), so the feed can be programmed to match the section thickness required.
Two things work together: the silicon rod is clamped once and never moved during the cut, and the support platform uses an elastic support design that significantly reduces chipping. Measured edge chipping stays within 5 毫米, and sections as thin as 0.5 mm can be produced.
Silicon sludge hardens on the track and quickly degrades screw-type guide rails. Hard rails tolerate that condition far better — our first hard-rail machine has been running for six years and the track is still within tolerance.
The machine is designed for both wet and dry operating conditions. Whether dry cutting is appropriate depends on the material being cut — some materials require coolant for chip removal and surface quality. Please confirm the intended material with us and we will advise the correct configuration.
Main drive motor is 2 KW; total weight is 3500 公斤; overall dimensions are 3800 mm × 3000 mm × 2800 毫米. Because the cutting assembly moves instead of the workpiece, the machine occupies roughly half the floor space of a conventional design handling rods of the same length. Cooling is by water circulation.