ESC600-4T Diamond Fil Saw koupe machin

Main kondwi motè pouvwa: 2kw
Pwa total: 3500 KG.
Dimansyon jeneral: Longè 3800mm x Lajè 3000mm x Wotè 2800mm
Koupe Range: Nan 2000mm x 600mm x 600mm (longè x lajè x wotè)
Deplasman sèvè pouvwa motè pou aks y: 1.5kw; pou z aks: 1.5kw
Koupe vitès liy: 0-40m / s, ajistab
Koupe dyamèt liy: 0.35-0.8mm
Refwadisman metòd: Sikilasyon dlo

Deskripsyon Product:

Machin nan koupe Silisyòm Esc600-4T se yon fil espesyalize wè ki fèt pou segmentasyon an quantitative nan baton ki gen fòm monokristalin Silisyòm (polikristalin Silisyòm). Li itilize yon fil dyaman sikilè devlope pa konpayi nou an kòm zouti nan koupe ak se konpatib ak fil dyaman sikilè nan 0.35mm, 0.45mm, 0.5mm, ak 0.6mm an dyamèt.

diamond-wire-saw-cutting-machine-5555

Prensip opere:

Machine koupe Silisyòm Esc600-4T a mete baton Silisyòm lan sou worktable pandan koupe. Yon koupe te fè nan pozisyon ki make dapre kondisyon yo gwosè koupe. Baton an Silisyòm pa bezwen deplase; Worktable a orizontal manje dimansyon ki apwopriye ki baze sou anviwònman yo pwograme yo reyalize kantitatif koupe segmentation. Mouvman orizontal la kondwi pa yon motè sèvè deplasman, asire dimensionnement egzak, ak kapasite nan koupe materyèl tankou mens tankou 0.5mm. Fil la dyaman sikilè sèvi kòm yon zouti koupe espesyalize, pwodwi bri minimòm koupe, ba konsomasyon enèji, segondè efikasite koupe, redwi gaspiye materyèl akòz ti kerfs, ak sifas lis sou baton Silisyòm, reyalize yon “Koupe ak fanm k'ap pile” efè. Machin sa a se yon machin koupe doub-bi pou tou de kondisyon mouye ak sèk, Apwopriye pou koupe materyèl baton nan divès kondisyon travay. Li ka koupe gwosè baton kristal ak longè maksimòm ak dyamèt rive jiska 2000mm x 600mm.

diamond-wire-saw-cutting-machine--9999

pwodwi Features:

Avantaj prensipal yo nan ekipman sa a yo jan sa a:

  1. Ekipman an adopte yon konsepsyon kote eleman nan koupe deplase, olye ke pyès la, sa ki lakòz yon estrikti kontra enfòmèl ant. Pou materyèl baton nan menm longè a, Dimansyon ekstèn ekipman an se prèske mwatye gwosè a.
  2. Akòz pwopriyete yo inik nan materyèl Silisyòm, Sistèm Mouvman Component Koupe a sèvi ak ray difisil olye pou yo ray yo gid vis pi komen. Ray Hard gen yon avantaj iranplasabl lè fè fas ak depo Silisyòm fè tèt di toujou sou track la, ak yon validite tras nan plis pase 6 ane (Premye ekipman tren difisil nou an te nan operasyon pou 6 ane, yon figi ki ka kontinye ogmante).
  3. Pou asire paralelis la nan nenpòt ki sifas koupe nan baton Silisyòm, Apwòch la enplike nan yon konplo kote se materyèl la baton Silisyòm sere yon fwa san yo pa plis mouvman garanti koupe paralelism. Anplis de sa, Sèvi ak inovatè nan sipò elastik siyifikativman diminye pwoblèm chipin kwen pandan koupe, ak done chipin kwen nan 5mm.
  4. Platfòm nan sipò ka ajiste gwosè a ouvèti nan bouch la V ki gen fòm akomode koupe nan materyèl baton Silisyòm nan dyamèt diferan, fè yon sèl aparèy adaptab a prèske tout seri a nan espesifikasyon pwodwi yo.
  5. Tablo an loading idwolik fè loading pi fasil ak rezoud pwoblèm lan nan koupe nan konpozan sipò lè koupe baton Silisyòm nan nenpòt ki pozisyon, rezoud yon pwoblèm konplèks ak yon solisyon ki senp (referans solisyon konplèks nan kamarad klas).
  6. Yon konplo tension inovatè ak detèktè fòs elastik ogmante tansyon kòm nimewo a fil chanje. Ansanm, Se tansyon an konsève nan valè maksimòm pou sik koupe sa a lè se banza a fil koupe, pèmèt tranzisyon lis.
  7. Yon sistèm pwoteksyon tansyon entelijan otomatikman degaje kèk tansyon nan sistèm nan koupe lè yo pa nan operasyon pwoteje fil la ak pouli Groove soti nan domaj. Lè w ap antre nan estati operasyonèl, Li byen vit ajiste tansyon an nan nivo ki nesesè nan 2 segond.
  8. Yon fil kontinyèl sistèm chanje avèk siksè diminye pwobabilite ki genyen pou rupture fil nòmal pandan etap nan fil chanje a tou pre zewo pa tou dousman ogmante tansyon fil pandan operasyon.
  9. Plizyè desen ki an sekirite ak pwoteksyon sekirite yo te teste, ak, ak valide sou yon peryòd de 6 ane.

Frequently Asked Questions

What materials can the ESC600-4T cut?

The ESC600-4T is purpose-built for the quantitative segmentation of rod-shaped monocrystalline and polycrystalline silicon. It uses a closed-loop diamond wire as the cutting tool and is also suitable for cutting other rod-type materials under various working conditions.

What is the maximum workpiece size?

The cutting range is 2000 mm × 600 mm × 600 mm (length × width × height). Silicon rods are clamped once and do not need to be repositioned during the cut, which is what keeps the cut faces parallel.

Which diamond wire diameters does it support?

The machine accepts closed-loop diamond wire from 0.35 mm pou 0.8 mm in diameter. Because kerf width follows wire diameter, thinner wire means less material lost per cut.

What cutting speed can it reach?

Cutting line speed is adjustable from 0 pou 40 m / s. The worktable is driven by a Y-axis and Z-axis displacement servo motor (1.5 kW each), so the feed can be programmed to match the section thickness required.

How does it keep edge chipping under control?

Two things work together: the silicon rod is clamped once and never moved during the cut, and the support platform uses an elastic support design that significantly reduces chipping. Measured edge chipping stays within 5 mm, and sections as thin as 0.5 mm can be produced.

Why does it use hard rails instead of screw guide rails?

Silicon sludge hardens on the track and quickly degrades screw-type guide rails. Hard rails tolerate that condition far better — our first hard-rail machine has been running for six years and the track is still within tolerance.

Can it run both wet and dry?

The machine is designed for both wet and dry operating conditions. Whether dry cutting is appropriate depends on the material being cut — some materials require coolant for chip removal and surface quality. Please confirm the intended material with us and we will advise the correct configuration.

What are the power, weight and footprint?

Main drive motor is 2 kw; total weight is 3500 KG; overall dimensions are 3800 mm × 3000 mm × 2800 mm. Because the cutting assembly moves instead of the workpiece, the machine occupies roughly half the floor space of a conventional design handling rods of the same length. Cooling is by water circulation.