
ESG400-4T Gantry Endless Diamond Wire Saha Machine
Koneen koko: Pyörivä pöytä, 2200 × 1510 × 1100 mm; tavallinen kone, 2100 × 1510 × 1100 mm. Koneen paino: Pyörivä pöytä,…

Pääkäyttömoottorin teho: 2kw
Kokonaispaino: 3500 kg.
Yleiset mitat: Pituus 3800mm x Leveys 3000mm x Korkeus 2800mm
Leikkausalue: Sisällä 2000 mm x 600 mm x 600 mm (Pituus x leveys x korkeus)
Siirtymä servomoottorin teho y-akselille: 1.5kw; z-akselille: 1.5kw
Linjanopeus: 0-40neiti, säädettävä
Leikkauslinjan halkaisija: 0.35-0.8mm
Jäähdytysmenetelmä: Vedenkierto
ESC600-4T-piitangon leikkauskone on erikoistunut landahat, jotka on suunniteltu sauvanmuotoisen monokistaisen piin kvantitatiiviseen segmentointiin (polypiin). Siinä käytetään ympyrämuotoista timanttijohtoa, jonka yrityksemme on kehittänyt leikkaustyökaluna ja on yhteensopiva pyöreiden timanttijohtojen kanssa 0,35 mm, 0.45mm, 0.5mm, ja halkaisijaltaan 0,6 mm.

ESC600-4T-piitangon leikkauskone asettaa piidatanan työpöydälle leikkaamisen aikana. Leikkaus tehdään leikkauskokovaatimusten mukaan leikkaus. Piilatankoa ei tarvitse siirtää; Työpöytä syöttää vaakasuoraan sopivat mitat ohjelmoitujen asetusten perusteella kvantitatiivisen segmentoinnin leikkaamisen saavuttamiseksi. Vaakasuuntaista liikettä ohjaa siirtymän servomoottori, tarkan koon varmistaminen, kyky leikata niin ohut materiaalit kuin 0,5 mm. Pyöreä timanttilanka toimii erikoistuneena leikkaustyökaluna, tuottaa minimaalista leikkausmelua, vähäinen energiankulutus, korkea leikkaus hyötysuhde, Vähentynyt materiaalijätteet pienten kerfien takia, ja sileät pinnat piitangoilla, saavuttaa a “Leikkaus hiomalla” vaikutus. Tämä kone on kaksikäyttöinen leikkuukone sekä märissä että kuivissa olosuhteissa, Sopii sauvan materiaalien leikkaamiseen erilaisissa työolosuhteissa. Se voi leikata kristallitankokoot, joiden enimmäispituudet ja halkaisijat saavuttavat jopa 2000 mm x 600 mm.

Tämän laitteen tärkeimmät edut ovat seuraavat:
The ESC600-4T is purpose-built for the quantitative segmentation of rod-shaped monocrystalline and polycrystalline silicon. It uses a closed-loop diamond wire as the cutting tool and is also suitable for cutting other rod-type materials under various working conditions.
The cutting range is 2000 mm × 600 mm × 600 mm (length × width × height). Silicon rods are clamped once and do not need to be repositioned during the cut, which is what keeps the cut faces parallel.
The machine accepts closed-loop diamond wire from 0.35 mm asti 0.8 mm in diameter. Because kerf width follows wire diameter, thinner wire means less material lost per cut.
Cutting line speed is adjustable from 0 että 40 neiti. The worktable is driven by a Y-axis and Z-axis displacement servo motor (1.5 kW each), so the feed can be programmed to match the section thickness required.
Two things work together: the silicon rod is clamped once and never moved during the cut, and the support platform uses an elastic support design that significantly reduces chipping. Measured edge chipping stays within 5 mm, and sections as thin as 0.5 mm can be produced.
Silicon sludge hardens on the track and quickly degrades screw-type guide rails. Hard rails tolerate that condition far better — our first hard-rail machine has been running for six years and the track is still within tolerance.
The machine is designed for both wet and dry operating conditions. Whether dry cutting is appropriate depends on the material being cut — some materials require coolant for chip removal and surface quality. Please confirm the intended material with us and we will advise the correct configuration.
Main drive motor is 2 kw; total weight is 3500 kg; overall dimensions are 3800 mm × 3000 mm × 2800 mm. Because the cutting assembly moves instead of the workpiece, the machine occupies roughly half the floor space of a conventional design handling rods of the same length. Cooling is by water circulation.