
ESD150-3T teemanttraadi sae lõikamismasin
Seadme suurus: 650mm*750mm*980mm(L*L*H) Seadme kaal: 230Kg Workbench size: 150*150mm Feed speed: 0.1-10mm/min Cutting line speed: 0-35m/s Cutting stroke: 150*150mm (Y telg*z telg) Maximum cutting…

Peamine ajammootori võimsus: 2kw
Kogukaal: 3500 kg.
Üldmõõtmed: Pikkus 3800 mm x laius 3000 mm x kõrgus 2800 mm
Lõikamisvahemik: 2000 mm x 600mm x 600mm piires (pikkus x laius x kõrgus)
Nihke servomootori võimsus y-telje jaoks: 1.5kw; Z-telje jaoks: 1.5kw
Lõikeliini kiirus: 0-40Prl, reguleeritav
Lõikejoone läbimõõt: 0.35-0.8mm
Jahutusmeetod: Veeringlus
ESC600-4T Ränivarda lõikeautoma (polükristalliline räni). See kasutab lõikevahendina meie ettevõtte välja töötatud ümmargust teemanttraati ja ühildub ümmarguste teemantjuhtmetega 0,35 mm, 0.45mm, 0.5mm, ja 0,6 mm läbimõõduga.

ESC600-4T Ränivarda lõikeautoma. Lõige tehakse märgistatud asendis vastavalt lõikamissuuruse nõuetele. Ränivarda ei pea teisaldama; Töötatav toidab horisontaalselt sobivaid mõõtmeid programmeeritud sätete põhjal, et saavutada kvantitatiivne segmenteerimise lõikamine. Horisontaalset liikumist juhib nihke servomootor, Täpse suuruse tagamine, Võime lõigata nii õhukesed materjalid 0,5 mm. Ümmargune teemanttraadi on spetsialiseeritud lõikevahend, põhjustades minimaalse lõikemüra, väike energiatarbimine, kõrge lõikamine tõhususe, Väikeste KERFide tõttu vähendatud materjali raiskamine, ja siledad pinnad ränivarrastel, saavutamine a “Lõikamine lihvimisega” mõju. See masin on kaheotstarbeline lõikeautoma, Sobib varda materjalide lõikamiseks erinevates töötingimustes. See võib lõigata kristallvarda suurused maksimaalse pikkusega ja läbimõõtudega, ulatudes kuni 2000 mm x 600mm.

Selle seadme peamised eelised on järgmised:
The ESC600-4T is purpose-built for the quantitative segmentation of rod-shaped monocrystalline and polycrystalline silicon. It uses a closed-loop diamond wire as the cutting tool and is also suitable for cutting other rod-type materials under various working conditions.
The cutting range is 2000 mm × 600 mm × 600 mm (length × width × height). Silicon rods are clamped once and do not need to be repositioned during the cut, which is what keeps the cut faces parallel.
The machine accepts closed-loop diamond wire from 0.35 mm kuni 0.8 mm in diameter. Because kerf width follows wire diameter, thinner wire means less material lost per cut.
Cutting line speed is adjustable from 0 juurde 40 Prl. The worktable is driven by a Y-axis and Z-axis displacement servo motor (1.5 kW each), so the feed can be programmed to match the section thickness required.
Two things work together: the silicon rod is clamped once and never moved during the cut, and the support platform uses an elastic support design that significantly reduces chipping. Measured edge chipping stays within 5 mm, and sections as thin as 0.5 mm can be produced.
Silicon sludge hardens on the track and quickly degrades screw-type guide rails. Hard rails tolerate that condition far better — our first hard-rail machine has been running for six years and the track is still within tolerance.
The machine is designed for both wet and dry operating conditions. Whether dry cutting is appropriate depends on the material being cut — some materials require coolant for chip removal and surface quality. Please confirm the intended material with us and we will advise the correct configuration.
Main drive motor is 2 kw; total weight is 3500 kg; overall dimensions are 3800 mm × 3000 mm × 2800 mm. Because the cutting assembly moves instead of the workpiece, the machine occupies roughly half the floor space of a conventional design handling rods of the same length. Cooling is by water circulation.