
Automatisk specialformet skæremaskine
Strømforsyning: 220V Maximum Cutting Size: 250mm × 250 mm × 250 mm (Længde × Bredde × Højde) Skæring slagtilfælde: 300mm × 300 mm (X-akse × Y-akse)…

Hoveddrevet motorkraft: 2kW
Samlet vægt: 3500 kg.
Overordnede dimensioner: Længde 3800mm x Bredde 3000mm x Højde 2800mm
Skæreområde: Inden for 2000 mm x 600 mm x 600 mm (længde x bredde x højde)
Forskydningsservomotoreffekt til Y-akse: 1.5kW; for Z-aksen: 1.5kW
Skærelinjehastighed: 0-40Frk, justerbar
Skærelinje diameter: 0.35-0.8mm
Kølemetode: Vandcirkulation
ESC600-4T siliciumstangskæremaskine er en specialiseret ledningssav designet til den kvantitative segmentering af stangformet monokrystallinsk silicium (polykrystallinsk silicium). Den bruger en cirkulær diamanttråd udviklet af vores firma som skæreværktøjet og er kompatibelt med cirkulære diamantledninger på 0,35 mm, 0.45mm, 0.5mm, og 0,6 mm i diameter.

ESC600-4T siliciumstangskæremaskine placerer siliciumstangen på arbejdsbordet under skæring. Der foretages et snit i den markante position i henhold til kravene til nedskæringsstørrelsesstørrelsen. Siliciumstangen behøver ikke flyttes; Den arbejdstable horisontalt fodrer de relevante dimensioner baseret på de programmerede indstillinger for at opnå kvantitativ segmenteringskæring. Den vandrette bevægelse er drevet af en forskydningsservo -motor, sikrer præcis størrelse, med evnen til at skære materialer så tynde som 0,5 mm. Den cirkulære diamanttråd fungerer som et specialiseret skæreværktøj, Produktion af minimal skærestøj, lavt energiforbrug, høj skæreeffektivitet, Nedsat materiale spild på grund af små kerfs, og glatte overflader på siliciumstænger, Opnå en “Skæring med slibning” effekt. Denne maskine er en dobbeltformålskæremaskine til både våde og tørre forhold, Velegnet til skæring af stangmaterialer under forskellige arbejdsforhold. Det kan skære krystalstangstørrelser med maksimale længder og diametre, der når op til 2000 mm x 600 mm.

De vigtigste fordele ved dette udstyr er som følger:
The ESC600-4T is purpose-built for the quantitative segmentation of rod-shaped monocrystalline and polycrystalline silicon. It uses a closed-loop diamond wire as the cutting tool and is also suitable for cutting other rod-type materials under various working conditions.
The cutting range is 2000 mm × 600 mm × 600 mm (length × width × height). Silicon rods are clamped once and do not need to be repositioned during the cut, which is what keeps the cut faces parallel.
The machine accepts closed-loop diamond wire from 0.35 mm til 0.8 mm in diameter. Because kerf width follows wire diameter, thinner wire means less material lost per cut.
Cutting line speed is adjustable from 0 til 40 Frk. The worktable is driven by a Y-axis and Z-axis displacement servo motor (1.5 kW each), so the feed can be programmed to match the section thickness required.
Two things work together: the silicon rod is clamped once and never moved during the cut, and the support platform uses an elastic support design that significantly reduces chipping. Measured edge chipping stays within 5 mm, and sections as thin as 0.5 mm can be produced.
Silicon sludge hardens on the track and quickly degrades screw-type guide rails. Hard rails tolerate that condition far better — our first hard-rail machine has been running for six years and the track is still within tolerance.
The machine is designed for both wet and dry operating conditions. Whether dry cutting is appropriate depends on the material being cut — some materials require coolant for chip removal and surface quality. Please confirm the intended material with us and we will advise the correct configuration.
Main drive motor is 2 kW; total weight is 3500 kg; overall dimensions are 3800 mm × 3000 mm × 2800 mm. Because the cutting assembly moves instead of the workpiece, the machine occupies roughly half the floor space of a conventional design handling rods of the same length. Cooling is by water circulation.